PSN-L Email List Message

Subject: Re: Coil winding formula ?
From: barry lotz gbl@.......
Date: Mon, 24 Jul 2000 21:17:15 -0700


Arie
   "And now for something completely different". If your question is for
determining the length of wire for a multiple turn coil , I would use the
average diameter(to get the average circumference- not considering nesting
condition ),length, and wire diameter.
   let see...   looking at a cross section,
       if  # of turns = (L/gage)* (b/gage) , where L=coil length and b = coil
radial thickness
       and if total  length of the wire= (# of turns)*(d+b)*pi  , where d is the
coil ID
                             assuming   (b+d)*pi   is the average circumference
of a turn
       then solve the first equation for b and substitute in second equation
       and punt- maybe there is a simpler way
-----
I have a slightly different formula(s) for inductance (got it from that small
information pocket book available at electronic store checkout counters).
    For single layer coil:
                      I=(R^2 * N^2)/(9*R+10*L)
    For multiple layers:
                      I=(0.8*(R^2*N^2)/(6*R+9*L+10*B))

     where:       I= inductance in microhenrys
                      N=number of turns
                       R=radius to center of windings(inches)
                       B= radial thickness of windings(inches)
                        L=length of coil(inches)
Regards
Barry


Arie Verveer wrote:

> Hi, A long time ago, far, far away, I used to remember a simple formula
> that gave the length of wire for a coil, given the number of turns, internal
> diameter, length of coil and gauge of the wire. But alas, I cant remember
> it, so if anyone knows such a "winding" formula, I would be most
> appreciative. Or anything like it.
>
> Arie

__________________________________________________________

Public Seismic Network Mailing List (PSN-L)


[ Top ] [ Back ] [ Home Page ]

Larry Cochrane <cochrane@..............>