PSN-L Email List Message
Subject: Re: Filter/Amplifier
From: "Randall Pratt" randallpratts@..........
Date: Sun, 14 Apr 2002 16:45:22 -0500
Steve,
Thanks for help. I was quite certain it was in the final OP27 stage of the
circuit you referenced. I started resoldering and found the connection to
pin 6 to be the culprit. I don't have all back together but the last 2
stages and the AD are running fairly quietly now for a couple of hours.
While on the noise subject, I have readings up to about 15 counts from just
the LF353 and the last OP27 with a jumper across the input in front of the 3
pole filter. With the OP27 removed the AD sits at a steady 2. Is this
about what I should experience? I have a 5K pot for gain set about half or
a little more. The noise doesn't seem to have a particular frequency on the
fft.
Randy
----- Original Message -----
From: "steve hammond"
To:
Sent: Sunday, April 14, 2002 12:31 PM
Subject: RE: Filter/Amplifier
> http://pw2.netcom.com/~shammon1/equip.htm are you talking about the amp
at
> the bottom of this page or like this one this is the steps I follow? Check
> the seismograph for spider webs. Check the connections for dampness and
> clip
__________________________________________________________
Public Seismic Network Mailing List (PSN-L)
[ Top ]
[ Back ]
[ Home Page ]