PSN-L Email List Message

Subject: Re: Seismic "Hookup"
From: "Mauro Mariotti" mariotti@.........
Date: Mon, 2 Sep 2002 08:24:53 +0200


Hi Ed,
yes, the idea is ok.

for the all members of the list:
does someone knows the communication protocol of the Dataq converter?
Or there is a web site where it is described. I'll make a little =
internet research...
but if someone knows something please post the info...
thanks
Mauro

  ----- Original Message -----=20
  From: Ed Ianni=20
  To: psn-l@.................
  Sent: Monday, September 02, 2002 5:35 AM
  Subject: Seismic "Hookup"


  Hi All;
          I am very new to seismology and I thank you all for your =
previous help. Initially I would like to get into seismology in an =
inexpensive  way. Am I right in assuming that I can connect the DATAQ =
STARTER KIT input to the output ( 2 wires) of my pre-amplifier (which is =
fed by a  lehman sensor [together they are currently driving a =
Perkin-Elmer chart recorder ])....and then take the output of the DATAQ =
STARTER KIT and feed it into the serial port of my computer?=20
                                                                         =
                              Thank you very much.    Ed.  =20







Hi Ed,
yes, the idea is ok.
 
for the all members of the = list:
does someone knows the communication = protocol of=20 the Dataq converter?
Or there is a web site where it is = described. I'll=20 make a little internet research...
but if someone knows something please = post the=20 info...
thanks
Mauro
 
----- Original Message -----
From:=20 Ed = Ianni=20
To: psn-l@..............
Sent: Monday, September 02, = 2002 5:35=20 AM
Subject: Seismic "Hookup"

Hi All;
        I am=20 very new to seismology and I thank you all for your previous help. = Initially I=20 would like to get into seismology in an inexpensive  way. Am I right in assuming that I can connect the = DATAQ STARTER=20 KIT input to the output ( 2 wires) of my = pre-amplifier (which=20 is fed by a  lehman sensor [together they=20 are currently driving a Perkin-Elmer chart recorder = ])....and=20 then take the output of the DATAQ STARTER=20 KIT and feed it into the serial port of my computer?
          &nbs= p;            = ;            =             &= nbsp;           &n= bsp;           &nb= sp;           &nbs= p;            = ;    =20 Thank you very much.   =20 Ed.   

[ Top ] [ Back ] [ Home Page ]