PSN-L Email List Message
Subject: Re: Subject: Vertical sensors
From: "Mauro Mariotti" mariotti@.........
Date: Tue, 24 Dec 2002 17:10:44 +0100
Hi,
you can use Larry's serial board with the laptop.
If you need something more little you can give a look to
http://www.infoeq.it/doc04_e.htm
it is a 4 channels board but it requires 10V dc
power supply and a preamplifier.
This board runs with SEISMOWIN.
Or, you can use the David Saum's board that can be used
with SEISMOWIN or AMASEIS.
Regards
Mauro
----- Original Message -----
From: "BOB BARNS"
To:
Sent: Tuesday, December 24, 2002 4:30 PM
Subject: Re: Subject: Vertical sensors
> Allan,
> Windows could probably run the recording program in the background.
> This requires that the computer be left running 24/7 which, even without
> the monitor takes a fair amount of AC power.
> I looked around in ebay.com and discovered that there are many laptops
> (requiring less power) for $125 or less. A few bucks more will get a
> considerably better machine.
> I looked for laptops which had at least Windows, 96K of RAM and some
> means of reloading Windows (3.1 is good enough) and programs-either a
> floppy drive or CD-ROM drive (if only one, a floppy drive). A
> monochrome screen is good enough (although I'm not sure that Windows is
> useable with monochrome).
> A working hard-drive is not necessary as a lot of 'quake data can be
> stored on a floppy if the sampling rate is kept low. A laptop will not
> accept Cochrane's excellant A/D board so an external A/D and some
> program other that SDR) would be necessary.
> If you go this way, be sure to get the computer's manual.
> Bob Barns
>
> allan egleston wrote:
> >
> > hi My name is Allan Egleston, and am new to the list. Am currently
> > building a horizontal lehman sensor at this time. Have been reading the
> > mail about Vertical sensors and it seems that there is a number to
> > choose from. A question for the group, can there be a way to record
> > events with out having to tie up a computer, as this seems to be the
> > accepted norm? Thanks, Allan Egleston, kf6uxj
> > __________________________________________________________
> >
> > Public Seismic Network Mailing List (PSN-L)
> >
> > To leave this list email PSN-L-REQUEST@.............. with
> > the body of the message (first line only): unsubscribe
> > See http://www.seismicnet.com/maillist.html for more information.
> __________________________________________________________
>
> Public Seismic Network Mailing List (PSN-L)
>
> To leave this list email PSN-L-REQUEST@.............. with
> the body of the message (first line only): unsubscribe
> See http://www.seismicnet.com/maillist.html for more information.
>
__________________________________________________________
Public Seismic Network Mailing List (PSN-L)
[ Top ]
[ Back ]
[ Home Page ]