PSN-L Email List Message

Subject: RE: Dataq DI-194RS Question
From: "Mike Lozano" mikel@...............
Date: Mon, 7 Jun 2004 23:28:58 -0500


 Bob,

 
Thanks for the information.  Like you, I couldn't get Mauro's program to
work, but I did get AmaSeis to work - at least it did for a while.  As
to the screen resolution, I'm not sure why the program I loaded from the
starter package CD opens up in 640 resolution instead of 1024.   I'm
going to play with it some more.  That's not the only problem I'm having
with this laptop though.  I tried to install ActiveSync (which came with
my HP Pocket PC), but it won't read to any of the COM ports!!!  Our IT
guy was telling me this afternoon, that it's likely a bug with the Dell
version of Windows XP Professional.  He's going to mess around with it
tomorrow.
 
By the way:  I've developed a circuit to measure 1 to 50 Pf of
capacitance and feed it as a current loop to a remote point.  I'm
thinking of building a horizontal pendulum seismograph similar to the
Shackleford-Gunderson, except without the RF oscillator.  Has anyone had
any experiences along these lines?  I'm going to build it in a leftover
enclosure built of  a welded 5/8 inch thick aircraft aluminum.  Picture
a frame that's 20 inches long; 10 inches wide and 4 inches thick.  One
open side is made of 1 inch thick Plexiglas. bolted at 2 inch intervals.
I had originally designed this to be a vacuum chamber for a project
involving leaking welds.  The company sponsoring the project was sold,
and the project was canned.
 
At any rate, what I'm thinking of doing is to make the hanging arm out
of 1" x 1/2" x 15" aluminum, suspended with stainless-steel thin gauge
safety wire.  Halfway along the rod I'll mount a 10 pound machined
plumber's weight, in which I'll machine a rectangular hole.  The bottom
of the rod will pass between two electrically 'floating' gates. The
capicitance will be that measured between the gates and the rod.
Hopefully, it'll work.  If not, it'll at least keep me out of the wife's
hair for a few weekends.  In case anyone's curious about my supply of
aircraft aluminum, I bought about one hundred plus pounds of it at the
Rockwell-Collins surplus outlet in Marion, Iowa several years ago.
 
Since I live in the Texas Hill Country north of San Antonio, the
limestone bedrock is less than 6 inches below the grass in the yard.
 
Thanks everyone, for your comments and suggestions.
 
Cheers,
 
Mike Lozano
San Antonio, Texas

-----Original Message----- 
From: Bobhelenmcclure@....... [mailto:Bobhelenmcclure@........ 
Sent: Sunday, June 06, 2004 9:11 PM
To: mikel@...............
Subject: Re: Dataq DI-194RS Question


In a message dated 6/6/2004 5:35:23 PM Eastern Daylight Time,
mikel@............... writes:




I'm now going to install the AMSEIS software, as well as the version
Mauro wrote.




Hi Mike,

  I'm pleased to hear you solved your problem, even if I cannot fathom
how you could get different screen resolutions on recording and
playback. I assume you know that you can make the screens any size you
want by dragging on the border. The monitor screen should always display
whatever resolution you set up in Windows.

  I operate three broadband sensors, using a DI-154 at 5 samples per
second per channel. Keeping accurate time is important to me, so I make
minute marks on my recordings using a signal derived from a WWVB
controlled wall clock. I cannot use AmaSeis because it does not record
my marks which are applied to the DI-154/194 digital input. It also
records only one channel, and has at most 12 bit resolution. 

  The Dataq Lite recorder can record up to 4 channels, accepts the
minute marks, and uses a sample rate of 240 samples per second, which is
averaged down to the recorded rate. I get 14 bits resolution because of
this.

  Mauro sent me the Dataq version of SeismoWin, but it would never work
for me. If you use it, I would like to know about it. It accepts more
than one channel, but at less resolution than the Dataq recorder. Like
Amaseis, its timing accuracy is only as good as the PC clock.

  I have written a lot of  seismic applications for the Dataq serial
devices using Visual Basic 6.0. You can look at my stuff at

  http://www.jclahr.com/science/psn/mcclure/

Regards,

Bob McClure 


---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.688 / Virus Database: 449 - Release Date: 5/18/2004



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.688 / Virus Database: 449 - Release Date: 5/18/2004



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.688 / Virus Database: 449 - Release Date: 5/18/2004
 



Message



 Bob,<= /DIV>
 
Thanks for the information.  Like you, I couldn't get = Mauro's=20 program to work, but I did get AmaSeis to work - at least it did for a = while.  As to the screen resolution, I'm not sure why the program = I=20 loaded from the starter package CD opens up in 640 resolution instead = of=20 1024.   I'm going to play with it some more.  That's = not the=20 only problem I'm having with this laptop though.  I tried to = install=20 ActiveSync (which came with my HP Pocket PC), but it won't read to any = of the=20 COM ports!!!  Our IT guy was telling me this afternoon, that it's = likely=20 a bug with the Dell version of Windows XP Professional.  He's = going to=20 mess around with it tomorrow.
 
By=20 the way:  I've developed a circuit to measure 1 to 50 Pf of=20 capacitance and feed it as a current loop to a remote point.  I'm = thinking of building a horizontal pendulum seismograph similar to = the=20 Shackleford-Gunderson, except without the RF oscillator.  Has = anyone had=20 any experiences along these lines?  I'm going to build it in a = leftover=20 enclosure built of  a welded 5/8 inch thick aircraft = aluminum.  Picture a frame that's = 20 inches long;=20 10 inches wide and 4 inches thick.  One open side is made of 1 = inch thick=20 Plexiglas. bolted at 2 inch intervals.  I had originally designed = this to=20 be a vacuum chamber for a project involving leaking welds.  The = company=20 sponsoring the project was sold, and the project was=20 canned.
 
At=20 any rate, what I'm thinking of doing is to make the hanging arm out of = 1" x=20 1/2" x 15" aluminum, suspended with stainless-steel thin gauge safety=20 wire.  Halfway along the rod I'll mount a 10 pound machined = plumber's=20 weight, in which I'll machine a rectangular hole.  The = bottom of the=20 rod will pass between two electrically 'floating' gates. The = capicitance will=20 be that measured between the gates and the rod.  Hopefully, it'll = work.  If not, it'll at least keep me out of the wife's hair for = a few=20 weekends.  In case anyone's curious about my supply of aircraft = aluminum,=20 I bought about one hundred plus pounds of it at the = Rockwell-Collins=20 surplus outlet in Marion, Iowa several years ago.
 
Since I live in the Texas Hill Country north of San Antonio, = the=20 limestone bedrock is less than 6 inches below the grass in the=20 yard.
 
Thanks everyone, for your comments and = suggestions.
 
Cheers,
 
Mike=20 Lozano
San=20 Antonio, Texas
-----Original Message----- 
From: = Bobhelenmcclure@.......... [mailto:Bobhelenmcclure@........
Sent: Sunday, June 06, = 2004 9:11=20 PM
To: mikel@...............
Subject: Re: Dataq = DI-194RS=20 Question

In a = message dated 6/6/2004=20 5:35:23 PM Eastern Daylight Time, mikel@............... = writes:


I'm now going to install the AMSEIS software, as well = as the=20 version Mauro wrote.



Hi = Mike,

  I'm=20 pleased to hear you solved your problem, even if I cannot fathom how = you=20 could get different screen resolutions on recording and playback. I = assume=20 you know that you can make the screens any size you want by dragging = on the=20 border. The monitor screen should always display whatever resolution = you set=20 up in Windows.

  I operate three broadband sensors, = using a=20 DI-154 at 5 samples per second per channel. Keeping accurate time is = important to me, so I make minute marks on my recordings using a = signal=20 derived from a WWVB controlled wall clock. I cannot use AmaSeis = because it=20 does not record my marks which are applied to the DI-154/194 digital = input.=20 It also records only one channel, and has at most 12 bit resolution. =

  The Dataq Lite recorder can record up to 4 channels, = accepts=20 the minute marks, and uses a sample rate of 240 samples per second, = which is=20 averaged down to the recorded rate. I get 14 bits resolution because = of=20 this.

  Mauro sent me the Dataq version of SeismoWin, = but it=20 would never work for me. If you use it, I would like to know about = it. It=20 accepts more than one channel, but at less resolution than the Dataq = recorder. Like Amaseis, its timing accuracy is only as good as the = PC=20 clock.

  I have written a lot of  seismic = applications for=20 the Dataq serial devices using Visual Basic 6.0. You can look at my = stuff=20 at

 =20 = http://www.jclahr.com/science/psn/mcclure/

Regards,

Bob=20 McClure

---
Incoming mail is certified Virus = Free.
Checked by=20 AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.688 = / Virus=20 Database: 449 - Release Date: = 5/18/2004


---
Outgoing mail is certified Virus = Free.
Checked by=20 AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.688 / = Virus=20 Database: 449 - Release Date:=20 5/18/2004


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.688 / Virus Database: 449 - Release Date: 5/18/2004


[ Top ] [ Back ] [ Home Page ]