PSN-L Email List Message
Subject: Re: microseism filter
From: John or Jan Lahr johnjan@........
Date: Sat, 26 Feb 2005 17:27:43 -0800
Hi Stephen,
I don't think that AmaSeis can handle two data streams from a single DATAQ
AD. However,
if you use two AD's and attach each to a different com port, then I believe
you can run two
copies of AmaSeis at the same time. Of course each copy must be run in
it's own directory.
Cheers,
John Lahr
At 10:02 AM 2/26/2005, you wrote:
>Speaking of AmaSies, is anyone running it with the DataQ DI-150RS???
>The RS was the two channel Radio Shack version!! I've tried the two
>dataq options and while it does record somewhat, it does not record
>properly,,, the time advances at about twice the proper rate and at the
>end of each trace it goes through a strange iteration and drops about the
>last half of the record,, anything recorded in that last half is
>lost!!!! A few months ago I tried emailing the person who wrote it, but
>no response! If I can find a way to use it, I'd like to try it for
>awhile!! Thanks in advance for any help!
>You may email me directly at: skmort@..........
> Stephen Mortensen
> PSN Station #55
> near Pilot Hill Ca. USA
> 38.828N 120.979W
>
>>>>I am running two copies of Amasies simultaneosly -- one short period
>>>>vertical and the other the wideband vertical. I like the program very
>>>>much but am always looking to try others that may be availabe . I am
>>>>really new at this so have a lot to learn.
>>>>Best,
>>>>Dave Nelson
>>>>Palos Verdes Peninsula California
>__________________________________________________________
>
>Public Seismic Network Mailing List (PSN-L)
>
>To leave this list email PSN-L-REQUEST@.............. with the body of the
>message (first line only): unsubscribe
>See http://www.seismicnet.com/maillist.html for more information.
__________________________________________________________
Public Seismic Network Mailing List (PSN-L)
[ Top ]
[ Back ]
[ Home Page ]