PSN-L Email List Message

Subject: Re: good leveling screw source
From: "Charles R. Patton" charles.r.patton@........
Date: Tue, 18 Oct 2005 21:48:24 -0700


I know Angel and others are talking about micrometers for leveling 
screws -- but any micrometer I'm familiar with only has 40 TPI, not a 
lot better than a 10/32 screw, and the screw is a lot cheaper, that's 
why I suggested some of the metric screws with 0.25 pitch (101.6 TPI).  
The laser adjustment screws are generally in the 80 TPI range with some 
in the 100 TPI class, but they are generally $20 or more, whiile the 
metric screws can be put together for a dollar or two. 

Today I was talking to my machinist friend, and he gets  one inch 
micrometers for $10 from
Industrial Tool Sales in Costa Mesa, California   Phone:    
949-631-1586.  These micrometers have tungsten faces and are made in 
China.  They look great.  He may be getting a bit of a price break as 
they buy a lot of tooling, but nevertheless, that is still a very low 
price, and  is the lowest price I know of.

Regards,
Charles Patton

Larry P Thomas wrote:

>How about adapting (modifying) a cheap micrometer as an adjustment screw.
>Should 100 tpi and would have a nice knurled handle to turn.  Just an idea.
>It may not end up any cheaper.
>
>Later,
>Larry P. Thomas, wa0gwa
>
>Imagine it/Achieve it --- Dream it/Become it
>Larry P. Thomas,    wa0gwa    1 913 244-8761
>Krell Technologies    (http://www.krell.com)
>PO BOX  3565,  OLATHE,  KS  66063-3565   USA 
>
>  
>
>-----Original Message-----
>From: psn-l-request@.............. [mailto:psn-l-request@............... On
>Behalf Of Mark Robinson
>Sent: Tuesday, October 18, 2005 5:54 AM
>To: psn-l@..............
>Subject: Re: good leveling screw source
>
>Angel wrote:
>  
>
>>Hello,
>>
>>I have spent a good hour looking on the web for some nice leveling
>>screws with no luck.  Does anyone on the list have a source.
>>
>>Something with a high thread count and a point so the thing does not
>>walk when you turn it.
>>    
>>
>
>Roger's post got my head working.
>
>Have a look at some old carburettors at a car wreckers.
>
>I was always impressed by the flame adjustment screws in old Bic Flic
>lighters, but they seem to be unobtanium in NZ these days.
>
>Mark
>
>__________________________________________________________
>
>Public Seismic Network Mailing List (PSN-L)
>
>To leave this list email PSN-L-REQUEST@.............. with 
>the body of the message (first line only): unsubscribe
>See http://www.seismicnet.com/maillist.html for more information.
>
>__________________________________________________________
>
>Public Seismic Network Mailing List (PSN-L)
>
>To leave this list email PSN-L-REQUEST@.............. with 
>the body of the message (first line only): unsubscribe
>See http://www.seismicnet.com/maillist.html for more information.
>
>
>
>  
>

__________________________________________________________

Public Seismic Network Mailing List (PSN-L)


[ Top ] [ Back ] [ Home Page ]