PSN-L Email List Message
Subject: Re: Sensor and Damping magnets
From: "James Hannon" jmhannon@.........
Date: Mon, 27 Mar 2006 10:54:51 -0600
Things must have changed. I haven't done any comparisons lately but when I did I thought they had good prices on the magnets.
Sorry,
Jim Hannon
---------- Original Message ----------------------------------
From: ChrisAtUpw@.......
Reply-To: psn-l@..............
Date: Mon, 27 Mar 2006 11:46:53 EST
>
>In a message dated 27/03/2006, jmhannon@......... writes:
>
>Here is another good place to buy magnets.
>http://www.forcefieldmagnets.com/catalog/
>
>
>
>Hi Jim,
>
> They used to be quite good and inexpensive. However, they now only stock
>the 0033 1"x1/2"x1/4" magnet size, not the 1" square x1/8". For these they
>want $3+pp each and they only have 39 in stock.
> Looking at their copper wire they want $18 for a 1lb reel of 36 awg and
>they only have 4 reels in stock. This is 13,219 ft at 423 Ohm /1000 ft. They
>have 6 of the 34awg reels @ $17, 8,310 ft at 266 ohms / 1000 ft. You might
>need a bit over 1,500 ft for a coil.
>
> _http://www.kjmagnetics.com/_ (http://www.kjmagnetics.com/) have to
>1"x1/2"x1/4" BX084 magnets 4off @ $7.95 and the 1"square x1/8" BX0X02 magnets
>4off @ $12.45
> When I make suggestions for suppliers, I do try to check that they have
>the products available and at a 'market' price.
>
> Regards,
>
> Chris Chapman
>
>
--
Jim Hannon
http://www.fmtcs.com/web/jmhannon/
42,11.90N,91,39.26W
WB0TXL
--
__________________________________________________________
Public Seismic Network Mailing List (PSN-L)
[ Top ]
[ Back ]
[ Home Page ]