On Sat, 14 Oct 2006 08:41:11 -0500, "Randy" writes,
My lehmen has been  inop for for some time after some power supply wires 
shorted together and  fried most everything including the computer ps and 
motherboard.  I  have begun a rebuild with some changes and ideas 
beginning with moving from  EMON to Amaseis.  I don't see instructions to 
run multiple channels and  I was wondering if this is possible?  I tried 
opening 2 copies in  different directories and windows but the com port 
conflicts.  I have  converted from the AD I constructed to a Dataq 154. 
 
Hi Randy,
 
  If you are using a Dataq device, you can log, filter, and heliplot  display 
up to
four channels, using my suite of software. You can also convert  the WDQ
files to Winquake PSN Type 4 files.
 
  See _http://www.jclahr.com/science/psn/mcclure/_ 
(http://www.jclahr.com/science/psn/mcclure/)   and download "seismic_dataq.zip"
 
Cheers,
 
Bob 





On Sat, 14 Oct 2006 08:41:11 -0500, "Randy" writes,
My lehmen has be=
en=20
inop for for some time after some power supply wires 
shorted together an=
d=20
fried most everything including the computer ps and 
motherboard.  I=
=20
have begun a rebuild with some changes and ideas 
beginning with moving f=
rom=20
EMON to Amaseis.  I don't see instructions to 
run multiple channels=
 and=20
I was wondering if this is possible?  I tried 
opening 2 copies in=20
different directories and windows but the com port 
conflicts.  I ha=
ve=20
converted from the AD I constructed to a Dataq 154. 
 
Hi Randy,
 
  If you are using a Dataq device, you can log, filter, and helipl=
ot=20
display up to
four channels, using my suite of software. You can also con=
vert=20
the WDQ
files to Winquake PSN Type 4 files.
 
  See http://www.jclahr.com/sc=
ience/psn/mcclure/=20
and download "seismic_dataq.zip"
 
Cheers,
 
Bob