PSN-L Email List Message
Subject: Re: Magnetic Damping
From: "tchannel" tchannel@..............
Date: Sat, 11 Nov 2006 08:46:30 -0700
Hi Jerry, I am sure others will post the various sites showing magnetic =
damping, but I just wanted to share my experiences with both types of =
damping, oil vs magnetic.
I used Chris's magnetic design and it worked perfectly, very effective, =
very simple and easy to adjust.
But before that, I tried the oil in a cup design. It too was simple =
and easy to adjust. When I filled the cup, one of my wife's Tupperware =
containers I spilled a little oil on the floor, After adjusting it I =
spilled a little more, then I bumped it and spilled alot. I needed to =
move things around and in doing so I spilled the entire cup, =
Fortunately it was on a concrete floor, but I had to use solvents and =
lots of paper towels, to get the oil off of the concrete.
THINGS HAPPEN! The oil, seems to be a good damp, but compared to the =
magnetic there is no contest.
Thanks, Ted ps if you email me I can send you a close-up of the =
magnetic damper on my Lehman.
----- Original Message -----=20
From: Jerry Payton=20
To: PSN-L=20
Sent: Saturday, November 11, 2006 7:29 AM
Subject: Magnetic Damping
Where may I find details for constructing magnetic damping for a =
Lehman sensor, please.
Thank you,
Hi Jerry, I am sure others will =
post the=20
various sites showing magnetic damping, but I just wanted to share my=20
experiences with both types of damping, oil vs magnetic.
I used Chris's magnetic design and it =
worked=20
perfectly, very effective, very simple and easy to adjust.
But before that, I tried the oil in a =
cup=20
design. It too was simple and easy to adjust. =
When I=20
filled the cup, one of my wife's Tupperware containers I spilled a =
little oil on=20
the floor, After adjusting it I spilled a little more, then I =
bumped it=20
and spilled alot. I needed to move things around and in doing so I =
spilled=20
the entire cup, Fortunately it was on a concrete floor, but I had =
to use=20
solvents and lots of paper towels, to get the oil off of the=20
concrete.
THINGS HAPPEN! The oil, =
seems to be a=20
good damp, but compared to the magnetic there is no =
contest.
Thanks, Ted ps if you email =
me I can=20
send you a close-up of the magnetic damper on my Lehman.
----- Original Message -----
Sent: Saturday, November 11, =
2006 7:29=20
AM
Subject: Magnetic Damping
Where may I find details for constructing magnetic damping for a =
Lehman=20
sensor, please.
Thank you,
Jerry Payton
[ Top ]
[ Back ]
[ Home Page ]