PSN-L Email List Message
Subject: Re: STM-8
From: ChrisAtUpw@.......
Date: Wed, 28 Feb 2007 12:57:45 EST
In a message dated 2007/02/28, kpayea@........... writes:
> Much easier than trying to get bits of metal filings out of the magnet gap!
Hi Keith,
First off, 'wipe' the inside of the gap with a round mild steel rod
several times. This will pick up most of the filings. Then you press on and peel
off strips of Gaffer Tape, using a wood spatula. This has a rubber based
adhesive which is good at picking up and removing dust, dirt and magnetic
particles.
Regards,
Chris Chapman
In a me=
ssage dated 2007/02/28, kpayea@........... writes:
Much easier than trying to get=
bits of metal filings out of the magnet gap!
Hi Keith,
First off, 'wipe' the inside of the gap=
with a round mild steel rod several times. This will pick up most of the fi=
lings. Then you press on and peel off strips of Gaffer Tape, using a wood sp=
atula. This has a rubber based adhesive which is good at picking up and remo=
ving dust, dirt and magnetic particles.
Regards,
Chris Chapman =20
[ Top ]
[ Back ]
[ Home Page ]