Hello Folks,
I was just thinking about the sample rate for Amaseis.
The preamp board I have from Larry Cochrane is set to 10 HZ -3db point low
pass filter.
This means that a minimum sample rate of at least 2x should be used, I
think according to Mr Nyquist.
My Amaseis is set to sample at 6 SPS. This should lead to some interesting
aliasing results.
In the config file I changed the sample rate to 20 SPS and now the Winquake
FFT window shows out to 10 Hz.
I have not tested an upload to the PSN yet.
Any thoughts out there.
PauLC
W1VLF
Hello=20
Folks,
I was=20
just thinking about the sample rate for Amaseis.
The=20
preamp board I have from Larry Cochrane is set to 10 HZ -3db point low =
pass=20
filter.
This=20
means that a minimum sample rate of at least 2x should be used, I =
think=20
according to Mr Nyquist.
My=20
Amaseis is set to sample at 6 SPS. This should lead to some =
interesting=20
aliasing results.
In the=20
config file I changed the sample rate to 20 SPS and now the Winquake FFT =
window=20
shows out to 10 Hz.
I have=20
not tested an upload to the PSN yet.
Any=20
thoughts out there.
PauLC
W1VLF