Hi John,  In the pictures, the front of the box is open, I will cover it 
with a piece of Plexiglas, with removable screws.
The box Melamine, 3/4" cabinet material, with a face frame and back to make 
it as stiff as possible.
Thanks, Ted


----- Original Message ----- 
From: "John Lahr" 
To: 
Sent: Saturday, August 04, 2007 9:33 AM
Subject: Re: More Folded Pictures


> Nice pictures.
>
> How was the box constructed?  How do you get into the box?  Does the front 
> lift up or side up or something?
>
> Thanks,
> John
>
> At 09:08 PM 8/3/2007, you wrote:
>>Hi folks,  I am still learning how to post picture.  They are looking 
>>better.  If you are interesting in the Folded Pendulum modifications and 
>>details, I added more picts to 
>>http://picasaweb.google.com/tchannel33 
>>the lasted pictures in that Album are those with no captions.  Please 
>>notice the linkage now come to rest at 90 degrees, the older,captioned 
>>pictures show it favoring the Right hand side by 10 degrees?  The .010" 
>>wires are now visible in one of the pictures.  You might also notice the 
>>mass is now much closer to the center line, with both pendulums near 
>>vertical.
>>
>>
>>Thanks for all of your help..........Special thanks to Chris for trying to 
>>improve my linkage issues.
>>
>>The picture do show some improvements, but most of the modifications can't 
>>be seen.   It is much better then it was, so I will keep on 
>>it...........Ted
>
>
> __________________________________________________________
>
> Public Seismic Network Mailing List (PSN-L)
>
> To leave this list email PSN-L-REQUEST@.............. with the body of the 
> message (first line only): unsubscribe
> See http://www.seismicnet.com/maillist.html for more information. 

__________________________________________________________

Public Seismic Network Mailing List (PSN-L)