PSN-L Email List Message
Subject: Re: PreAmplifier Design for HS-10 1Hz geophone
From: ChrisAtUpw@.......
Date: Sat, 11 Aug 2007 14:59:25 EDT
In a message dated 2007/08/11, gmvoeth@........... writes:
> Comments welcome as well as improvements.
>
Hi Geoff,
The 400 Ohm HS-10 requires a 2050 Ohms damping resistor and you have 2
K Ohms.
You need a second 0.33 mu F capacitor across the 100 K resistor to
Earth to balance the circuit. The 0.33 mu F across the input terminals is not
doing anything!
Regards,
Chris Chapman
In a me=
ssage dated 2007/08/11, gmvoeth@........... writes:
Comments welcome as well as imp=
rovements.
Hi Geoff,
The 400 Ohm HS-10 requires a 2050 Ohms dampin=
g resistor and you have 2 K Ohms.
You need a second 0.33 mu F capacitor a=
cross the 100 K resistor to Earth to balance the circuit. The 0.33 mu F acro=
ss the input terminals is not doing anything!
Regards,
Chris Chapman
[ Top ]
[ Back ]
[ Home Page ]