PSN-L Email List Message
Subject: Re: Best Way TO show a simple drawing
From: Dave Nelson davenn@...............
Date: Mon, 13 Aug 2007 06:53:14 +1000
No way :) that is slow and labourous!!! .... the BEST way is to draw
the circuit
diag directly into MS paint
and save as a monochrome bitmap (bmp) then use one of any # of programs
to convert it to a gif I use Thumbsplus its a great prog that I have
used for
resizing, recolouring, etc and it converts between most of the current pic
format
types. I couldnt live with out it
In fact cuz a mono bitmap file is only 103kB at my hi resolution, most of
the time
I dont even bother to convert it. !!!!
I have been using MS paint for cct drawings for some 12 yrs .... its esy
to make
up a page of cct symbols and jst copy and paste to where u need them
and add a few lines between along with explanation text.
I have drawn dozens and dozens of ccts this way
( without the need to go to an expensive CAD prog.)
check out www.sydneystormcity.com/10GHz-Mod-Tonegen-AFC.bmp
and www.sydneystormcity.com/23GHz-Sys-Block-diag.bmp
for examples (copy and paste into your
browser :) )
You have my permission to use these 2 bmp's as a starting point for some
component symbols etc, if you like :)
cheers
Dave N
VK2TDN
At 05:07 AM 12/08/2007 -0700, you wrote:
>Use a fine point black magic marker on the whitest paper you can find
>here that is 96 to 98 I think depending on the thickness.
>20lb ream vs 22 0r 24 lb. scan this to bmp then convert
>to gif somehow. HP will not let me scan direct to gif
>yet gif is the best most efficient forms for B/W drawings.
__________________________________________________________
Public Seismic Network Mailing List (PSN-L)
[ Top ]
[ Back ]
[ Home Page ]