PSN-L Email List Message
Subject: 30 second period
From: tchannel1@............
Date: Tue, 18 Dec 2007 12:17:58 -0700
Hi Folks, I will leave my Band Saw Blade sensor set up until I record a =
few earthquakes, just to see how they look. Meanwhile the sensor is in =
the garage and is picking up a lot of noise, both from the road =
construction, near by, and me moving around the garage. However it all =
quiets down at night.
After this test, I do wish to pursue the idea of using music wire, piano =
wire, or the like. I also will secure both the top and bottom of the =
wire, and put the barbell in the center.
Before I make the next device, could someone answer these questions.
1. I know the shorter the wire the shorter the period, but If I use two =
wires, say 36", one on top of the horz and one on the bottom of the =
horz, would the period be the same as using one,
72" wire, on the top only? Or would it just reflect the length of the =
top wire only, and not the bottom wire?
2. Using the same mass and length of wire, would thinner wire result in =
a longer period?
3. This was a surprise: As I mentioned, the isolation continued for =
5hrs. I have tried different pendulums, with different hinges. I have =
tried different springs. These would only cycle for a few seconds and =
up to maybe 30 mins. Can someone explain the different, of the longer =
periond of the torsion spring? =20
This is all new to me, but I can see why the Anniversary clock can run =
for so many days without winding. I have experimented with clock =
escapements, and have made some wooden clocks. I just find it =
interesting, but never saw anything that continued to move, on its own, =
like this torsion spring.
Hi Folks, I will leave my Band =
Saw Blade=20
sensor set up until I record a few earthquakes, just to see how they =
look. =20
Meanwhile the sensor is in the garage and is picking up a lot of noise, =
both=20
from the road construction, near by, and me moving around the=20
garage. However it all quiets down at =
night.
After this test, I do wish to pursue =
the idea of=20
using music wire, piano wire, or the like. I also will =
secure both=20
the top and bottom of the wire, and put the barbell in the =
center.
Before I make the next device, could =
someone answer=20
these questions.
1. I know the shorter the wire =
the shorter=20
the period, but If I use two wires, say 36", one on top of the horz and =
one on=20
the bottom of the horz, would the period be the same as using =
one,
72" wire, on the top only? =
Or would it=20
just reflect the length of the top wire only, and not the bottom=20
wire?
2. Using the same mass and length =
of wire,=20
would thinner wire result in a longer period?
3. This was a surprise: As =
I mentioned,=20
the isolation continued for 5hrs. I have tried different =
pendulums,=20
with different hinges. I have tried different springs. These =
would=20
only cycle for a few seconds and up to maybe 30 mins. Can =
someone=20
explain the different, of the longer periond of the torsion =
spring? =20
This is all new to me, but I can see =
why the=20
Anniversary clock can run for so many days without winding. I have =
experimented with clock escapements, and have made some wooden =
clocks. I=20
just find it interesting, but never saw anything that continued to move, =
on its=20
own, like this torsion spring.
Thanks, Ted
[ Top ]
[ Back ]
[ Home Page ]