PSN-L Email List Message
Subject: Re: Tungsten Pins
From: ChrisAtUpw@.......
Date: Tue, 10 Jun 2008 09:19:55 EDT
In a message dated 2008/06/10, jamesridout@.............. writes:
> If anyones Interested, I can get a good supply of 3mm & 6mm Broken milling
> cutter shanks. They are about 40mm long ,and made of Tungnsten Carbide.
Hi James,
That could be very helpful. They could both be used in seisometers.
Do the cutters hve a screw thread on one end and the cutter on the
other, or do they use a smooth shank, please?
Regards,
Chris Chapman
In a me=
ssage dated 2008/06/10, jamesridout@.............. writes:
If anyones Interested, I=20=
can get a good supply of 3mm & 6mm Broken milling cutter shanks. They ar=
e about 40mm long ,and made of Tungnsten Carbide.
Hi James,
That could be very helpful. They could=20=
both be used in seisometers.
Do the cutters hve a screw thread on on=
e end and the cutter on the other, or do they use a smooth shank, please?
Regards,
Chris Chapman
[ Top ]
[ Back ]
[ Home Page ]