PSN-L Email List Message
Subject: Re: Tungsten Pins
From: tchannel1@............
Date: Tue, 10 Jun 2008 07:36:43 -0600
Hi James, I too would be very interested in getting some of these. =
Please, when you have time email me with details.
Ted
----- Original Message -----=20
From: ChrisAtUpw@..........
To: psn-l@.................
Sent: Tuesday, June 10, 2008 7:19 AM
Subject: Re: Tungsten Pins
In a message dated 2008/06/10, jamesridout@.............. writes:
If anyones Interested, I can get a good supply of 3mm & 6mm Broken =
milling cutter shanks. They are about 40mm long ,and made of Tungnsten =
Carbide.
Hi James,
That could be very helpful. They could both be used in =
seisometers.=20
Do the cutters hve a screw thread on one end and the cutter on =
the other, or do they use a smooth shank, please?
Regards,
Hi James, I too would be very =
interested in getting=20
some of these. Please, when you have time email me with=20
details.
Ted
----- Original Message -----
Sent: Tuesday, June 10, 2008 =
7:19=20
AM
Subject: Re: Tungsten =
Pins
In a=20
message dated 2008/06/10, jamesridout@..............=
=20
writes:
If anyones Interested, I can get a good supply of =
3mm=20
& 6mm Broken milling cutter shanks. They are about 40mm long =
,and made=20
of Tungnsten Carbide.
Hi=20
James,
That could be very =
helpful.=20
They could both be used in seisometers.=20
Do the cutters hve a =
screw thread=20
on one end and the cutter on the other, or do they use a smooth shank, =
please?
=20
Regards,
Chris =
Chapman=20
[ Top ]
[ Back ]
[ Home Page ]