PSN-L Email List Message
Subject: Re: Digest from 07/25/2008 00:01:49
From: "Randy" rpratt@.............
Date: Sat, 26 Jul 2008 10:35:08 -0500
There is an impulse calibration procedure in Section 4.5.1 of the Manual on
Seismological Observatory Practice at this link. Also see Bob McClures web
pages.
http://www.seismo.com/msop/msop79/msop.html
Randy
----- Original Message -----
From:
To:
Sent: Saturday, July 26, 2008 02:00
Subject: Digest from 07/25/2008 00:01:49
>
> .------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
> | Message 1 |
> '------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
> Subject: calibrating Lehmans
> From: "Thomas Dick"
> Date: Fri, 25 Jul 2008 21:08:23 -0500
>
> Wasn't there an article on calibrating Lehman-type seismometers
> usingWinQuake and a small weight hitting the mass?
>
>
>
> .------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
> | Message 2 |
> '------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
> Subject: Re: calibrating Lehmans
> From: ChrisAtUpw@.......
> Date: Sat, 26 Jul 2008 01:42:32 EDT
>
>
> --part1_ce0.338ab4aa.35bc1348_boundary
> Content-Type: text/plain; charset="US-ASCII"
> Content-Transfer-Encoding: 7bit
>
> In a message dated 2008/07/26, dickthomas01@............. writes:
>
> > Wasn't there an article on calibrating Lehman-type seismometers
> > usingWinQuake and a small weight hitting the mass?
>
> Hi Tom,
>
> There was an article which used a paper clip and a 90 degree V of
> cotton thread to apply a known small force to the arm. You applied a match
to burn
> the thread and release it.
>
> Regards,
>
> Chris Chapman
>
> --part1_ce0.338ab4aa.35bc1348_boundary
> Content-Type: text/html; charset="US-ASCII"
> Content-Transfer-Encoding: quoted-printable
>
> In a
me=
> ssage dated 2008/07/26, dickthomas01@............. writes:
>
> : 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">Wasn't there an article on
cali=
> brating Lehman-type seismometers
> usingWinQuake and a small weight hitting the mass?
>
> Hi Tom,
>
> There was an article which used a
paper=
> clip and a 90 degree V of cotton thread to apply a known small force to
the=
> arm. You applied a match to burn the thread and release it.
>
> Regards,
>
> Chris Chapman
>
> --part1_ce0.338ab4aa.35bc1348_boundary--
>
>
> __________________________________________________________
>
> Public Seismic Network Mailing List (PSN-L)
>
> To leave this list email PSN-L-DIGEST-REQUEST@.............. with
> the body of the message (first line only): unsubscribe
> See http://www.seismicnet.com/maillist.html for more information.
>
__________________________________________________________
Public Seismic Network Mailing List (PSN-L)
[ Top ]
[ Back ]
[ Home Page ]