PSN-L Email List Message
Subject: Re: Amaseis
From: "Kay Wyatt" kwyatt@.............
Date: Sun, 27 Jul 2008 08:59:05 -0700
Chris,
On the Amaseis toolbar, you can select "Settings" and then "Device". =
There is a popup with a list of devices, one of which is a DATAQ194, It =
doesn't have an "RS" on the device name, but I was wondering if you had =
noticed this option. If you have already done this, then perhaps you =
might contact Alan Jones at alan.jones@.............. who wrote the =
software. Keep us posted on your progress.
Kay Wyatt
----- Original Message -----=20
From: christopher.marshall@..........
To: PSN-L@.................
Sent: Sunday, July 27, 2008 8:00 AM
Subject: Amaseis
Greetings,
First, I'll apologize for this posting since I am sure it comes up =
repeatedly. I searched the archives but couldn't find anything that =
answered my problem. I have a Lehmann connected via Larry Cochrane's =
amplifier filter board to a DATAQ 194RS A/D input. With everything set =
up, I get a good tracing on the DATAQ data acquisition module, confirmed =
by 'thumping' next to the seismograph and getting a strong oscillation =
in the tracing, but Amaseis either indicates it cannot open the com port =
or opens it but doesn't produce a trace. I have tried two separate =
computers running Windows XP and Windows ME, two different ports, serial =
and USB via an adapter and the results are identical. I get activity on =
Seismowin but I find that program obscure versus Amaseis, which I have =
used in the past.
Any ideas?
Chris Marshall
Chris,
On the Amaseis toolbar, you can select =
"Settings" and then=20
"Device". There is a popup with a list of devices, one of which is =
a=20
DATAQ194, It doesn't have an "RS" on the device name, but I was =
wondering=20
if you had noticed this option. If you have already done =
this, then=20
perhaps you might contact Alan Jones at alan.jones@..............=20
who wrote the software. Keep us posted =
on your=20
progress.
Kay Wyatt
----- Original Message -----
Sent: Sunday, July 27, 2008 =
8:00 AM
Subject: Amaseis
Greetings,
First, I'll apologize for this posting since I am sure it comes =
up=20
repeatedly. I searched the archives but couldn't find anything that =
answered=20
my problem. I have a Lehmann connected via Larry Cochrane's amplifier =
filter=20
board to a DATAQ 194RS A/D input. With everything set up, I get a good =
tracing=20
on the DATAQ data acquisition module, confirmed by 'thumping' next to =
the=20
seismograph and getting a strong oscillation in the tracing, but =
Amaseis=20
either indicates it cannot open the com port or opens it but doesn't =
produce a=20
trace. I have tried two separate computers running Windows XP and =
Windows ME,=20
two different ports, serial and USB via an adapter and the results are =
identical. I get activity on Seismowin but I find that program obscure =
versus=20
Amaseis, which I have used in the past.
Any ideas?
Chris Marshall
Tucson, AZ
[ Top ]
[ Back ]
[ Home Page ]