James,

You're welcome. You might also sometime check the 0.025" piano wire
condition on either side/end of the main spring.  Check that there is
~ a length (~3-6") of that wire coming out of the back top adjustment.
Bigger hobby shops often carry such; and some of the more stocked Ace
Hardware stores "might" also; its very cheap.  With most sizes of about
everything switching to metric sizes....who knows if it will be
available afew years down the road....the upper wire compression screw
adjustments are made for that size.

Take care, Meredith



On Thu, Aug 21, 2008 at 8:39 PM, JAMES ALLEN  wrote:

>  Thanks a million Meredith.  I will buy a couple of them this weekend and
> give it a try.  BTW, the thread between You, Dick and Chris was extremely
> helpful in causing me to rethink my situation involving my vertical.  I had
> just assumed that it was all stock until I read you guys exchanges.  I am
> much appreciative to all of you.
> James Allen
>
James,
 
You're welcome. You might also sometime check the 0.025" piano wire condition on either side/end of the main spring.  Check that there is
~ a length (~3-6") of that wire coming out of the back top adjustment.  Bigger hobby shops often carry such; and some of the more stocked Ace Hardware stores "might" also; its very cheap.  With most sizes of about everything switching to metric sizes....who knows if it will be

available afew years down the road....the upper wire compression screw adjustments are made for that size.

Take care, Meredith




 
On Thu, Aug 21, 2008 at 8:39 PM, JAMES ALLEN <jcallen1@...........> wrote:



Thanks a million Meredith.  I will buy a couple of them this weekend and give it a try.  BTW, the thread between You, Dick and Chris was extremely helpful in causing me to rethink my situation involving my vertical.  I had just assumed that it was all stock until I read you guys exchanges.  I am much appreciative to all of you.



James Allen