Lately when I attempt to access  NEIC events through the event report in 
WinQuake I am invariable unsuccessful with the status box continuously 
reflecting "connecting to host".  Anyone having a similar problem or a fix 
for this?
James Allen
----- Original Message ----- 
From: "Geoff" 
To: 
Sent: Sunday, November 02, 2008 1:14 AM
Subject: Re: unusual frequency


> In my previous answer I made a mistake as follows.
> "I had a s-p or s-L time"
> Should have read as follows.
> "I had a s-p or L-p time"
> OOOPS !
> geoff
>
>
> ----- Original Message ----- 
> From: "Bob Hancock" 
> To: 
> Sent: Saturday, November 01, 2008 8:16 PM
> Subject: Re: unusual frequency
>
>
>> This event appears to be consistent with other low magnitude events  that 
>> have occurred to the Southwest of Tucson, AZ.  I have seen other  events 
>> that are similar, and no information was ever posted on them.   I noticed 
>> the event was visible across the lower 48 states, and  southern Alaska. 
>> It is most likely less than M 4.0 as that is the  USGS minimum cutoff for 
>> display of information on international events.
>>
>> Bob Hancock
>>
>>
>> On Nov 1, 2008, at 2:53 PM, Geoff wrote:
>>
>>> Hello Mr. Thomas Dick;
>>> My Sensor located very close to 33.42138N  -111.57477W about  507Meters 
>>> above mean sea level.
>>> I saw that TUC near Tucson also saw this signal about 1336 to 1338  on 
>>> 31OCT2008 UTC.
>>> I have not analyzed it to get an accurate and precise time simply 
>>> because I can not
>>> tell for sure it is in fact an Earthquake. If no one else is  reporting 
>>> it I do not trust
>>> what I am looking at. In order for me to properly read a signal it 
>>> takes extra effort
>>> which translates to opportunity costs ( such as Battlefield 2142  time ) 
>>> so I will not
>>> pursue more knowledge in detail if I can not verify the source 
>>> beforehand.
>>> The distance seems 600 miles to 700 miles from here maybe magnitude 4
>>> but nothing seems to match that as of my last look.
>>> Regards;
>>> geoff
>>>
>>> -
>> __________________________________________________________
>>
>> Public Seismic Network Mailing List (PSN-L)
>>
>> To leave this list email PSN-L-REQUEST@.............. with the body of 
>> the message (first line only): unsubscribe
>> See http://www.seismicnet.com/maillist.html for more information.
> __________________________________________________________
>
> Public Seismic Network Mailing List (PSN-L)
>
> To leave this list email PSN-L-REQUEST@.............. with the body of the 
> message (first line only): unsubscribe
> See http://www.seismicnet.com/maillist.html for more information. 

__________________________________________________________

Public Seismic Network Mailing List (PSN-L)