Hi Kareem
I haven't forgotten to send the ink to you. I have just been too busy to pa=
ck it up and ship it.
I have a nice Esterline Angus chart recorder with paper and pens that you c=
an have if you come to San Jose to pick it up. I ran it in my early seismom=
eter days. Now I'm all computerized.
I have house guests arriving Friday and another set arriving Monday. I will=
 get the ink to you in a week or so.
Pete

--- On Tue, 5/5/09, Kareem Lanier  wrote:

From: Kareem Lanier 
Subject: RE: Pen needed for Kinemetrics PS2
To: psn-l@..............
Date: Tuesday, May 5, 2009, 8:14 AM

This sounds like a good idear too.

What kind of ink should I get and from where should I obtain it?

=20

-----Original Message-----
From: psn-l-request@.............. [mailto:psn-l-request@............... On
Behalf Of Barry Lotz
Sent: Monday, April 27, 2009 7:38 PM
To: psn-l@..............
Subject: RE: Pen needed for Kinemetrics PS2

Kareem
Someone told me years ago to add a little glycerin to the ink to increase
the ink drying time and prevent clogging. I haven't tried it.
Regards
Barry


--- On Sun, 4/26/09, Kareem Lanier  wrote:


=A0=A0=A0 From: Kareem Lanier 
=A0=A0=A0 Subject: RE: Pen needed for Kinemetrics PS2
=A0=A0=A0 To: psn-l@..............
=A0=A0=A0 Date: Sunday, April 26, 2009, 7:58 AM
=A0=A0=A0=20
=A0=A0=A0=20
=A0=A0=A0 Thanks for your replies..
=A0=A0=A0=20
=A0=A0=A0 I would love to get the cleaning fluid and wire. Where would one
find such
=A0=A0=A0 materials? What's "OD?"
=A0=A0=A0=A0=A0
=A0=A0=A0=20
=A0=A0=A0 -----Original Message-----
=A0=A0=A0 From: psn-l-request@..............
[mailto:psn-l-request@............... On
=A0=A0=A0 Behalf Of ChrisAtUpw@.......
=A0=A0=A0 Sent: Saturday, April
=A0=A0=A0=A0=A025, 2009 11:03 AM
=A0=A0=A0 To: psn-l@..............
=A0=A0=A0 Subject: Re: Pen needed for Kinemetrics PS2
=A0=A0=A0=20
=A0=A0=A0 In a message dated 25/04/2009, system98765@............. writes:
=A0=A0=A0=20
=A0=A0=A0 =A0=A0=A0 IT's a kinemetrics PS2 system and I need a new pen for =
it. I
can't
=A0=A0=A0 seem to get a new pen from any viable sources. The manufacturer
wants to
=A0=A0=A0 charge an enormous amount of money. I wasn't sure if anyone knew =
how
to
=A0=A0=A0 make
=A0=A0=A0 one or point me in that direction. It just looks like a metal tub=
e
(very,
=A0=A0=A0 very small) that has a bend in it so that makes contact with the
paper.
=A0=A0=A0 =A0=A0=A0=20
=A0=A0=A0=20
=A0=A0=A0 Hi Kareem,
=A0=A0=A0=A0=A0
=A0=A0=A0 =A0 =A0 What is the matter with your existing pen? You can buy a =
special
=A0=A0=A0 cleaning fluid for capillary pens. You can also buy fine wire for
cleaning
=A0=A0=A0 out small tubes. I usually use fine piano wire or hard Nichrome
wire, ground
=A0=A0=A0 to a diagonal knife end. If you have a problem in getting cleanin=
g
fluid,
=A0=A0=A0 look for paint stripper fluid containing Methylene Chloride.
=A0=A0=A0 =A0 =A0 I can buy
=A0=A0=A0=A0=A0very small bore SS tube quite easily. What is the OD of your
=A0=A0=A0 existing tube?=20
=A0=A0=A0=A0=A0
=A0=A0=A0 =A0 =A0 Regards,
=A0=A0=A0=A0=A0
=A0=A0=A0 =A0 =A0 Chris Chapman
=A0=A0=A0=20
=A0=A0=A0 __________________________________________________________
=A0=A0=A0=20
=A0=A0=A0 Public Seismic Network Mailing List (PSN-L)
=A0=A0=A0=20
=A0=A0=A0 To leave this list email PSN-L-REQUEST@.............. with=20
=A0=A0=A0 the body of the message (first line only): unsubscribe
=A0=A0=A0 See http://www.seismicnet.com/maillist.html for more information.


__________________________________________________________

Public Seismic Network Mailing List (PSN-L)

Hi Kareem
I haven't forgotten to send the =
ink to you. I have just been too busy to pack it up and ship it.
I have =
a nice Esterline Angus chart recorder with paper and pens that you can have=
 if you come to San Jose to pick it up. I ran it in my early seismometer da=
ys. Now I'm all computerized.
I have house guests arriving Friday and an=
other set arriving Monday. I will get the ink to you in a week or so.
Pe=
te

--- On Tue, 5/5/09, Kareem Lanier <system98765@heyjoojoo=
..com> wrote:

From: Kareem Lanier=
 <system98765@.............>
Subject: RE: Pen needed for Kinemetri=
cs PS2
To: psn-l@..............
Date: Tuesday, May 5, 2009, 8:14 AM
This sounds like a good idear too.

Wh=
at kind
 of ink should I get and from where should I obtain it?

 

---=
--Original Message-----
From: psn-l-reque=
st@.............. [mailto:psn-l-request@=
webtronics.com] On
Behalf Of Barry Lotz
Sent: Monday, April 27, 2=
009 7:38 PM
To: psn-l@..............
Subject: RE: =
Pen needed for Kinemetrics PS2

Kareem
Someone told me years ago t=
o add a little glycerin to the ink to increase
the ink drying time and p=
revent clogging. I haven't tried it.
Regards
Barry


--- On =
Sun, 4/26/09, Kareem Lanier <system98765@heyjoo=
joo.com>
 wrote:


    From: Kareem Lanier <system98765@.............>
    Subject=
: RE: Pen needed for Kinemetrics PS2
    To: psn-l@..............
    Date: Sunday, April 26,=
 2009, 7:58 AM
    
    
  =
;  Thanks for your replies..
    
  &nb=
sp; I would love to get the cleaning fluid and wire. Where would one
fin=
d such
    materials? What's "OD?"
   &=
nbsp; 
    
    -----Original Mess=
age-----
    From: psn-l-request@webtr=
onics.com
[mailto:psn-l-request@webtr=
onics.com] On
    Behalf Of ChrisAtUpw@aol=
..com
    Sent: Saturday, April
   &=
nbsp; 25, 2009 11:03 AM
    To: psn-l=
@..............
    Subject: Re: Pen needed for Kinem=
etrics PS2
    
    In a message dated =
25/04/2009, system98765@............. writes:<=
br>    
        IT's a kine=
metrics PS2 system
 and I need a new pen for it. I
can't
    seem to get =
a new pen from any viable sources. The manufacturer
wants to
 &n=
bsp;  charge an enormous amount of money. I wasn't sure if anyone knew=
 how
to
    make
    one or point me=
 in that direction. It just looks like a metal tube
(very,
 &nbs=
p;  very small) that has a bend in it so that makes contact with thepaper.
        
        Hi Kareem,
     
 =
       What is the matter with your existing pen? You c=
an buy a special
    cleaning fluid for capillary pens. Y=
ou can also buy fine wire for
cleaning
    out small t=
ubes. I usually use fine piano wire or hard Nichrome
wire, ground
&nb=
sp;   to a diagonal knife end. If you have a problem in
 getting cleaning
fluid,
    look for paint stripper f=
luid containing Methylene Chloride.
        I c=
an buy
     very small bore SS tube quite easil=
y. What is the OD of your
    existing tube? 
 &n=
bsp;   
        Regards,
&nbs=
p;    
        Chris Chapma=
n
    
    ____________________________=
______________________________
    
   =
 Public Seismic Network Mailing List (PSN-L)
    
&nbs=
p;   To leave this list email PSN-=
L-REQUEST@.............. with 
    the body of the me=
ssage (first line only): unsubscribe
    See http://=
www.seismicnet.com/maillist.html for more information.


_____=
_____________________________________________________

Public Seismic=
 Network Mailing List (PSN-L)

To leave this list email PSN-L-REQUEST@.............. with 
the body of the=
 message (first line only): unsubscribe
See http://www.seismicnet.com/maillis=
t.html for more information.

[ Top ] 
[ Back ] 
[ Home Page ]