PSN-L Email List Message
Subject: Re: Large Response Coming in Now at 18:00 UTC
From: "tchannel" tchannel@............
Date: Mon, 3 Aug 2009 18:28:52 -0600
Hi Brett, How do I set up WinSDR or Winquake to view as movement? ( I
recorded 2.6 mm of movement on the vertical channel)
Thanks, Ted
----- Original Message -----
From: "Brett Nordgren"
To:
Sent: Monday, August 03, 2009 5:56 PM
Subject: Re: Large Response Coming in Now at 18:00 UTC
> Bob
>
> Now that I corrected the y-scale the plot from our vertical
> http://bnordgren.org/seismo/090803.175000.bhz-pl.psn.gif shows roughly
> 3mm/s peak, which agrees pretty well with the values (assuming you meant
> mm/s) that you were seeing. This is from near LA which is at about 6.5
> deg. It's interesting that if you assume the predominant frequency was
> 1/13 seconds, that should imply that the vertical ground motion at Dave's
> vault was about 6.2mm peak or 1.24 cm p-p. That's a lot of motion!
>
> For laughs, I uploaded the output from the high gain channel
> http://bnordgren.org/seismo/090803.175000.bhz-ph.psn.gif which clips at
> 300um/s and indeed it clipped. However, the low gain channel should be
> able to handle up to 1.5cm/sec peak.
>
> Brett
>
> At 11:28 AM 8/3/2009 -0700, you wrote:
>>There are two events, the first one if listed as M 5.8, the second event
>>is M 6.9. I recorded 2.6 mm of movement on the vertical channel, 3.8 mm
>>on the North channel, and 2.0 mm of movement on East channel. My station
>>is only 3.43 degrees (381.14 km) from the event.
>>
>>Bob Hancock
>
>
> __________________________________________________________
>
> Public Seismic Network Mailing List (PSN-L)
>
> To leave this list email PSN-L-REQUEST@.............. with the body of the
> message (first line only): unsubscribe
> See http://www.seismicnet.com/maillist.html for more information.
__________________________________________________________
Public Seismic Network Mailing List (PSN-L)
[ Top ]
[ Back ]
[ Home Page ]