PSN-L Email List Message
Subject: WinSDR question
From: Brett Nordgren brett3nt@.............
Date: Mon, 17 Aug 2009 14:55:19 -0400
Hi All,
I have been trying to provide calibration data for our 24-hour displays, by
going to Settings > Channel Control > DC Offset, putting in a number, then
watching how far the trace moves up/down. Knowing the instrument
sensitivity per count, I can translate that into velocity units per
line. I had been assuming that the number I was entering for the DC Offset
is always representing counts, but now I am not so sure.
Does anyone know how that works?
BTW I am getting frequent short data dropouts in the output display. I
have tracked that down to the possibility that I don't have enough RAM
(512MB) and am planning to add some more to see if that makes things better.
Thanks,
Brett
Watch our wiggles
http://bnordgren.org/seismo/gif_images.htm
or watch some very very good wiggles
http://aslwww.cr.usgs.gov/Seismic_Data/telemetry_data/ANMO_24hr.html
__________________________________________________________
Public Seismic Network Mailing List (PSN-L)
[ Top ]
[ Back ]
[ Home Page ]