PSN-L Email List Message
Subject: Re: USB Serial Ports in Windows Vista
From: Barry Lotz barry_lotz@.............
Date: Thu, 22 Apr 2010 17:30:16 -0700 (PDT)
Hi Keith
I bought a serial to usb cable at one of the box stores like Best Buy. Is t=
here a chip in the plugs? I thought it was done in software. I do have a se=
rial 12 bit ADC board that I bought to measure my sensors positions. It has=
done something like what you say. I am running XP. I also have no problem =
with Larry's board. I will have to remember the specifics but briefly, I ce=
rtain situations on booting when going to the ADC board program it says tha=
t the serial channel is not available. In my case it is 9. I then have to g=
o into the control panel etc. I will try to remember in more detail, and ge=
t back to you.
Regards
Barry
http://www.seismicvault.com
--- On Thu, 4/22/10, Keith Payea wrote:
From: Keith Payea
Subject: USB Serial Ports in Windows Vista
To: psn-l@..............
Date: Thursday, April 22, 2010, 11:15 AM
Has anyone else had this problem?=A0 I have a new USB-to-RS232 adapter from
Saelig.=A0 It works just fine with Larry's A/D board and Vista with one
exception.
If the system powers down or restarts, it will move to another COM port.
This is really annoying, and confusing for the guy I set it up for.=A0 I ca=
n't
change his OS, so don't even go there.
Any ideas?
Thanks,
=A0 =A0 Keith
=20
Keith Payea
Bryant Labs
kpayea@..............
www.bryantlabs.net
(707) 566-8935
=20
__________________________________________________________
Public Seismic Network Mailing List (PSN-L)
Hi Keith I bought a serial to usb cable at=
one of the box stores like Best Buy. Is there a chip in the plugs? I thoug=
ht it was done in software. I do have a serial 12 bit ADC board that I boug=
ht to measure my sensors positions. It has done something like what you say=
.. I am running XP. I also have no problem with Larry's board. I will have t=
o remember the specifics but briefly, I certain situations on booting when =
going to the ADC board program it says that the serial channel is not avail=
able. In my case it is 9. I then have to go into the control panel etc. I w=
ill try to remember in more detail, and get back to you.
Regards =
Barry http://www.seismicvault.com
--- On Thu, 4/22/10, Keith =
Payea <kpayea@..............> wrote:
From: Keith Payea <kpayea@..............> Subjec=
t: USB Serial Ports in Windows Vista To: psn-l@.............. Date: T=
hursday, April 22, 2010, 11:15 AM
Has anyon=
e else had this problem? I have a new USB-to-RS232 adapter from Sa=
elig. It works just fine with Larry's A/D board and Vista with one exception. If the system powers down or restarts, it will move to a=
nother COM port. This is really annoying, and confusing for the guy I se=
t it up for. I can't change his OS, so don't even go there. Any ideas? Thanks, Keith Keith Payea Bryant Labs kpayea@.............. www.bryantla=
bs.net (707) 566-8935
__________________________________________________________
=
Public Seismic Network Mailing List (PSN-L)
To leave this list email=
PSN-L-REQUEST@.............. with =
the body of the message (first line only): unsubscribe See http://www.seismic=
net.com/maillist.html for more information.
| =
[ Top ]
[ Back ]
[ Home Page ]