PSN-L Email List Message
Subject: Re: AmaSeis and DataQ
From: Robert McClure bobmcclure90@.........
Date: Fri, 28 May 2010 10:52:10 -0400
Have you tried recording with the regular Dataq software yet? That
should be your next move.
On 5/28/10, Ted Channel wrote:
> Hi folks, I think I have a defective DataQ194. I am trying to obtain
> another 194, to swap out, to confirm this. In the mean while, it has been
> suggest to try a different channel on the DataQ which has channels 1-4.
>
> My question is how to get AmaSeis to view channel 2 of DataQ? I have no
> problem with AmaSeis seeing ch 1, on com port 1. But when I change the
> input going into DataQ from ch 1 to ch 2, I see nothing in AmaSeis.
>
> Let's assume, I have everything connected and operating fine, with ch 1 in
> dataQ, and AmaSeis see the data and displays it normally.
>
> Now I change the input cable in the dataq from ch 1 to ch 2. What do I do
> next to get AmaSeis to see the trace?
>
> Perhaps I do nothing different in AmaSeis, and the reason I don't see the
> trace in AmaSeis is the dataq is defective?
>
> I called Dataq service, and they seem to think it could be defective, so I
> will swap it out when I get another. But if I can get a different ch to
> appear in AmaSeis I will check all four channels.
>
> Thanks, Ted
__________________________________________________________
Public Seismic Network Mailing List (PSN-L)
[ Top ]
[ Back ]
[ Home Page ]