PSN-L Email List Message
Subject: Re: AmaSeis and DataQ
From: "Ted Channel" tchannel@............
Date: Fri, 28 May 2010 18:38:15 -0600
Dave, Good Idea, I will change all the cables.
Thanks,
Chris, Also good Idea, Perhaps, I could take a battery, and reduce it with
resisters, to a known voltage, I don't have a variable power supply.
Confirm these voltages with a meter, something like 100mv 200,300,500 etc
all the way up to +10v, then -10v.
It only seem to clip on large negative numbers, so I could rig up a +9 and
a -9 volts, to see if it measure these incremental inputs.
Thanks, All
Ted
----- Original Message -----
From: "Dave Nelson"
To:
Sent: Friday, May 28, 2010 6:07 PM
Subject: Re: AmaSeis and DataQ
> Hey Ted,
>
> so that has to mean that the dataq unit ISNT faulty
> maybe you have a cable/connector fault between the dataq and the AmaSeis
> or that the input on the AmaSeis is faulty or the cable link between the
> AmaSeis
> and the computer
>
> cheers
> Dave
> Sydney
> Oz
>
>
> At 09:39 AM 5/28/2010 -0600, you wrote:
>>Hi Robert, Yes............I can see channel 1-4 in the dataq software
>>viewer. When I make the cable change from ch 1 to ch 2 in dataq ch 2 is
>>visible and recording. Now how can I make it visible in AmaSeis?
>>
>>Thanks, Ted
>>
>
> __________________________________________________________
>
> Public Seismic Network Mailing List (PSN-L)
>
> To leave this list email PSN-L-REQUEST@.............. with the body of the
> message (first line only): unsubscribe
> See http://www.seismicnet.com/maillist.html for more information.
__________________________________________________________
Public Seismic Network Mailing List (PSN-L)
[ Top ]
[ Back ]
[ Home Page ]