Jerry, they are magnitized through the thickness. I order mine through K&J = Magnetics at http://www.kjmagnetics.com The part number is=20 BX0X02 1" x 1" x 1/8" thick Grade N42 - Nickel Plated Magnetized thru Thickness Hope this helps. Kay ----- Original Message -----=20 From: GPayton=20 To: psn-l@................. Sent: Thursday, July 22, 2010 8:30 PM Subject: Chapman's sensor Design Looking closely at the drawings on this page, I am not certain about = the magnetization of the required sets of magnets. Are they magnetized = from end-to-end or through the thickness? Most magnets I have found online, so far, have been through the = thickness, but I am not sure what is shown on the drawing. Anyone know? Thanks, Jerry -------------------------------------------------------------------------= ----- Here is the link to Chris Chapman's coil design and instructions http://www.jclahr.com/science/psn/chapman/lehman/index.htmlJerry,they are magnitized through the = thickness. I=20 order mine through K&J Magnetics at http://www.kjmagnetics.com=The part number is Hope this = helps.Kay----- Original Message -----From:=20 GPayton=20Sent: Thursday, July 22, 2010 = 8:30=20 PMSubject: Chapman's sensor = DesignLooking closely at the drawings on this page, I am not certain = about the=20 magnetization of the required sets of magnets. Are they = magnetized from=20 end-to-end or through the thickness?Most magnets I have found online, so far, have been through the=20 thickness, but I am not sure what is shown on the drawing. = Anyone=20 know?Thanks,Jerry
Here is the link to Chris Chapman's = coil design=20 and instructions