PSN-L Email List Message

Subject: Re: PIS
From: Larry Cochrane lcochrane@..............
Date: Tue, 21 Sep 2010 18:08:42 -0700


All,

I know what these files ( P_is.jb and S_is.jb ) are, Jón Frímann created them based 
on a local Iceland travel-time model he found. Sorry it took so long to chime in. The 
"recent additions to the tables folder" rang a bell so I look at the file dates and 
then remembered Jón created these files for his location.

Regards,
Larry Cochrane
Webtronics

On 9/21/2010 1:59 PM, Bob McClure wrote:
> The phases Pis and Sis were more recent additions to the tables folder. I am
> wondering if they are for real. They are not formatted correctly, and I find
> that the arrival times are independent of event depth. I have never before
> found a listed phase which has no dependence on depth. Their distance range
> is short, only 1.11 degrees. Unless somebody can tell us more about these
> phases, do not add them to your phase list.
>
> Bob
>
> P.S.  By the way, the JB files in the Tables folder are in text format, and
> can be opened and inspected using NotePad. You can plot them by downloading
> my TravelTime.exe program, at
> http://sites.google.com/site/bobmcclure90/traveltime
>
> On Tue, Sep 21, 2010 at 1:53 PM, Randall Pratt  wrote:
>
>>   I have been looking at my WinQuake and the tables directory.  I do not
>>  see a table for PiS.  In Phase Control I have a P-(IASP91) available.  When
>>  I select this it gave a marker for P(I91) nearly 2 seconds before P on the
>>  data I had loaded.  Is it possible there are different versions of the
>>  WinQuake tables in some systems?  It would not be unusual for the IASP table
>>  to not match a JB table and the two should probably not be displayed on the
>>  same record.  I have WinQuake 2.9.8 for the record.  The table files are
>>  mostly from 1995 but the PI91 file is dated 1998.
>>
>>
>>
>>  Randy
>>
>
__________________________________________________________

Public Seismic Network Mailing List (PSNLIST)

To leave this list email PSNLIST-REQUEST@.............. with 
the body of the message (first line only): unsubscribe
See http://www.seismicnet.com/maillist.html for more information.

[ Top ] [ Back ] [ Home Page ]