PSN-L Email List Message
Subject: Re: Installation of a Kinemetric FBA-23 in my seismic vault.
From: Bob Hancock icarus@.........
Date: Tue, 19 Oct 2010 16:45:14 -0700
Hi Louis -
Your setup is VERY NICE !!!. It appears that you have gone to great =
efforts to build a VERY professional vault and pier. Hopefully this =
should block out temperature variations and ambient airflow. The =
isolation of the pier from the vault is well done.=20
How is your background noise on the vertical and horizontal channels?
Good Luck,
Bob Hancock
On Oct 18, 2010, at 9:33 PM, Louis Taber wrote:
> Hi,
>=20
> I just put up some pictures of my "seismic vault" on Facebook. It is =
located in central Tucson, AZ. So far the project has taken me about 4 =
years of occasional effort. Digging the original hole was most of the =
physical work. The hole is about 5.5 feet deep. =20
>=20
> =
http://www.facebook.com/album.php?aid=3D31424&id=3D100000335005655&l=3D81a=
5cef2df
>=20
> The next sep will be to start recording and processing the signal.
>=20
> - Louis
Hi Louis -
Your setup is VERY NICE !!!. =
It appears that you have gone to great efforts to build a VERY =
professional vault and pier. Hopefully this should block out =
temperature variations and ambient airflow. The isolation of the =
pier from the vault is well done.
How is =
your background noise on the vertical and horizontal =
channels?
Good =
Luck,
Bob =
Hancock
On Oct 18, 2010, at 9:33 PM, =
Louis Taber wrote:
Hi,
I=
just put up some pictures of my "seismic vault" on Facebook. It =
is located in central Tucson, AZ. So far the project has taken me =
about 4 years of occasional effort. Digging the original hole was =
most of the physical work. The hole is about 5.5 feet deep. =
http://www.facebook.com/album.php?aid=3D31424&=
;id=3D100000335005655&l=3D81a5cef2df
The next sep will be =
to start recording and processing the signal.
- Louis
=
[ Top ]
[ Back ]
[ Home Page ]