PSN-L Email List Message

Subject: RE: event saving in winquake
From: Dave Nelson dave.nelson@...............
Date: Thu, 07 Jul 2011 21:50:33 +1000


Greetings Steve

    OK   I will work my way through those suggestions. and let you know  the
results of each part  :)

    ok  initially I just quickly did the files from somewhere else check
I grabbed a bunck of PSN files from my main computer and transferred them
to the puter running SDR  and also a copy of WQ
(NOTE....  these files open no prob with the copy of WQ on the main puter
always have ...never been a problem)
They like my own files will NOT open on the SDR puter  WQ displays  the same
" Invalid Quake File (bad header check) " message
I tried the files in the SDR events folder, and the WQ data folder ... same 
problem

I guess Larry will be following this and may chime in with some comments :)

question.....
Is there a problem running SDR and WQ on the same puter ??
does any one else do that ?

Ah hah !!   moment of truth ....  transferred my file onto my main puter via
a memory stick   and guess what ?!!   it opens.

so what's the problem with WQ on the SDR puter.
Unless someone tells me I cant have WQ and SDR running on the same puter
I will try reinstalling WQ

cheers
Dave


At 09:12 PM 7/07/2011, you wrote:
>Hi DAVE, This does not sound good, you might want to send a note to
>Larry along with a sample dataset. I'm not sure what the " Invalid Quake
>File (bad header check) " message is. Here is a thought, go to Larry's
>site and get an event file and open it in Winquake to see if it opens
>without an error. I also have one more question, will Winquake open any
>dataset from your current WinSDR configuration or only the ones you
>created with Replay? Invalid to me says there might be a space or
>special char in one of the systems setting of WinSDR causing Winquake to
>crash. I would check to see if everything is lowercase and alpha/numeric
>without spaces or special characters. My next idea will take a little
>work but you might also try feeding channel #1 via jumper (channe#l
>input to the hardware board) to also feed channel #2 on the hardware
>board and then create channel #2 in WinSDR keeping the default settings
>and testing to see if you can create valid datasets.
>
>One other thing you might try, to just get the system going, if it is
>still not going, is to create a new subdirectory and then change the
>system files settings in WinSDR to use the new directory. Then fire up
>WinSDR and let it run for a few hours and trigger a few events by
>walking near the seismograph. Once you have a few hours of data in the
>new systems files test to see if Winquake works and if you can generate
>a replay event file that does work. In the past I've had WinSDR mess-up
>the system data files and at times completely stop being able to upload
>Gif image files or even just stop without warning. This has worked to
>get everything reset. My last though, go into WinSDR and find logging
>and turn logging on. Once it is started open the log file and you can
>view the messages as they are created. This might also give you a clue
>as to what the system is doing as it is running.
>
>Regards, Steve Hammond PSN San Jose.
>
>-----Original Message-----
>From: psnlist-request@..............
>[mailto:psnlist-request@............... On Behalf Of Dave Nelson
>Sent: Wednesday, July 06, 2011 11:59 PM
>To: psnlist@..............
>Subject: RE: event saving in winquake
>
>
>
>
>ok I changed the station ID to  xxxxxxx.syz.psn  (instead of
>xxxxxxx.sydz.psn ) within WinSDR and did another event save  it saved it
>under the new file name still wont load into WQ  and WQ still doesnt see
>the file within the events
>folder
>
>Dave
>
>__________________________________________________________
>
>Public Seismic Network Mailing List (PSNLIST)
>
>To leave this list email PSNLIST-REQUEST@.............. with
>the body of the message (first line only): unsubscribe
>See http://www.seismicnet.com/maillist.html for more information.
>
>__________________________________________________________
>
>Public Seismic Network Mailing List (PSNLIST)
>
>To leave this list email PSNLIST-REQUEST@.............. with
>the body of the message (first line only): unsubscribe
>See http://www.seismicnet.com/maillist.html for more information.

__________________________________________________________

Public Seismic Network Mailing List (PSNLIST)

To leave this list email PSNLIST-REQUEST@.............. with 
the body of the message (first line only): unsubscribe
See http://www.seismicnet.com/maillist.html for more information.

[ Top ] [ Back ] [ Home Page ]