Hi Dave, can you send me a PSN file to my email showing those 10Hz
oscillations please

Regards
Dale

-----Original Message-----
From: psnlist-request@.............. [mailto:psnlist-request@...............
On Behalf Of Dave Nelson
Sent: Sunday, 7 August 2011 8:47 AM
To: psnlist@..............
Subject: Re: new seismo

hi guys

     Am still getting nowhere with this system  !!  :(

  Rebuilt the dampening system and it works well for the natural period of
the
seismo.  That is, have the boom swinging naturally, ~ 7 sec period. Slide 
up the
dampening magnets to the aluminium vane and the natural osc stops within a
cycle.  That part looks ok

  The problem is when viewed on SDR there is an ongoing osc of ~ 10 Hz that
slowly dies off over another ~ 30 sec till the trace is basically 
flatlining. ( of course
you can't see the 10Hz osc visibly.
  With the dampening in place, the seismo is VERY responsive to hi freq
(>1Hz)
noise and any of this noise, walking around the house near the 
seismo,  vehicular
traffic out on the road, etc etc just shows up as a large amplitude of this 
10Hz
osc that then dies off back to the flatline ( + - a small data count).

If I remove the sensor coil from the there is NO ~ 10 Hz osc visible, That 
sort of
indicates that its not some extraneous signal being picked up. But on the
other
hand, I cant imagine how a supposed long period device is even able to osc
at
~ 10 Hz ??

cheers
Dave


__________________________________________________________

Public Seismic Network Mailing List (PSNLIST)

To leave this list email PSNLIST-REQUEST@.............. with 
the body of the message (first line only): unsubscribe
See http://www.seismicnet.com/maillist.html for more information.

__________________________________________________________

Public Seismic Network Mailing List (PSNLIST)

To leave this list email PSNLIST-REQUEST@.............. with 
the body of the message (first line only): unsubscribe
See http://www.seismicnet.com/maillist.html for more information.