Hello,

The station that is having issue is in fact in a area where power
problems are common. Light blinks, just for a second. If that is the
case, it explains the random errors that I am also getting. There might
also be power fluxation without the light going out, just dimming (drop
of volts in this case).

My system completley freezes (WinSDR, not the computer) up and I need to
reboot it in order to have it working again. I can do so over the
internet with no problems at all.

The other station, where this problem is not taking place. Does not have
any power issues that I know of.

I am going to solve the power issue with a backup power. I do not know
when I might be able to install it. One way or the other. At the
earliest, the backup power goes up in December this year.

Regards,
J=C3=B3n Fr=C3=ADmann.

On lau, 2012-06-23 at 22:54 +0000, Geoff wrote:
> On 2012-06-23 16:52, J=C3=B3n Fr=C3=ADmann wrote:
> > Hello,
> >
> > I have been having issues with usb to serial problem. But not with the
> > serial board from Larry. But rather one of my board that is running the
> > USB version of it. This issue does not happen on a second computer that
> > is also running WinSDR USB version. So this might be a usb hub issue (o=
n
> > the motherboard).
> >
> > The data stops at random times and I need to reboot my earthquake
> > computer to get it working again.
> >
> > I do not know it is the same problem that you are dealing with. But it
> > sounds about the same.
> >
> > I am now sending Larry some debug information on this issue. In the hop=
e
> > that I can fix it.
> >
> > Regards,
> > J=C3=B3n Fr=C3=ADmann.
> >
> > On lau, 2012-06-23 at 16:12 +0000, GeoffHM wrote:
> >> Hello PSN,
> >> Not sure but think going into the
> >> Device Manager and turning OFF
> >> the First-In First-Out Buffers
> >> has stopped the loss of data
> >> I had been having with WINSDR.
> >>
> >> I tried everything I could think of
> >> and nothing would stop the Random loss of data.
> >>
> >> Possibly, when you use a setup not
> >> requiring hardware or software
> >> flow controls. This is what should be dome.
> >> It dawns on me that data might be lost
> >> if flow control is not combined with the use of buffers.
> >>
> >> The buffers get filled for some WINDOWS reason
> >> and not serviced quick enough to stop loosing data.
> >>
> >> It might be called a Buffer Overrun problem.
> >>
> >> I really hate this tech revolution which simply
> >> creates a whole new car instead of making the old one better.
> >>
> >>
> >> ????
> >> geoff
> >> __________________________________________________________
> >>
> >> Public Seismic Network Mailing List (PSNLIST)
> >>
> >> To leave this list email PSNLIST-REQUEST@.............. with
> >> the body of the message (first line only): unsubscribe
> >> See http://www.seismicnet.com/maillist.html for more information.
> >
> > __________________________________________________________
> >
> > Public Seismic Network Mailing List (PSNLIST)
> >
> > To leave this list email PSNLIST-REQUEST@.............. with
> > the body of the message (first line only): unsubscribe
> > See http://www.seismicnet.com/maillist.html for more information.
> >
> It seems to somehow be related to
> RFI or Power Glitches to me
> It will recover but takes minutes to do so.
> It will run fine for hours at a time.
> I think its a driver issue.
> More so than Hardware.
>=20
> geoff
>=20
>=20
> __________________________________________________________
>=20
> Public Seismic Network Mailing List (PSNLIST)
>=20
> To leave this list email PSNLIST-REQUEST@.............. with=20
> the body of the message (first line only): unsubscribe
> See http://www.seismicnet.com/maillist.html for more information.


__________________________________________________________

Public Seismic Network Mailing List (PSNLIST)

To leave this list email PSNLIST-REQUEST@.............. with 
the body of the message (first line only): unsubscribe
See http://www.seismicnet.com/maillist.html for more information.