PSN-L Email List Message

Subject: RE: New WinQuake Release
From: "Stephen Hammond" shammon1@.............
Date: Mon, 6 May 2013 13:16:04 -0700


Thanks-- The odd part is these are the unprocessed files out of SDR. I'll
take a look at each and see if I can figure out the difference. 
S--

-----Original Message-----
From: psnlist-request@.............. [mailto:psnlist-request@...............
On Behalf Of Larry Cochrane
Sent: Monday, May 06, 2013 1:05 PM
To: psnlist@..............
Subject: Re: New WinQuake Release

Steve,

The rules to make a volume data set, two or three seismograms in the same
window, are rather strict. The files must have the following in common;

The same start time, down to the millisecond, must be the same.
The number of samples must be the same.
The sample rate must be the same.

If you can't see the file you want to add then one or more of the above
rules is not met.

Regards,
-Larry

On 5/6/2013 11:15 AM, Stephen Hammond wrote:
> Larry, I'm having an issue with file add feature. I have an event 
> directory on my local system D:\events that I place the three datasets 
> I'm currently working with (taken from the seismic system) and can 
> open them just fine when I use file > open. When I do this the menu 
> total file count window displays 3. If I'm working with N,E,Z alone 
> and just open one of them I can add N to E or E to Z or z to N or E 
> but I can never add all three together in the same window. Also, when 
> I hit the ADD button I only can see one of the files in the window not 
> all three of the files and the number up in the right corner of the 
> menu always is set to 1 not 3. Is this the correct behavior?
> Thanks-- Steve Hammond
>
> -----Original Message-----
> From: psnlist-request@.............. 
> [mailto:psnlist-request@...............
> On Behalf Of Larry Cochrane
> Sent: Wednesday, May 01, 2013 5:50 PM
> To: psnlist@..............
> Subject: New WinQuake Release
>
> Hi Everyone,
>
> The WinQuake problem that Dave reported has been fixed. Here are the 
> links to version
> 3.3.1:
>
> 32-Bit http://www.seismicnet.com/software/wq331_32bit.exe
>
> 64-Bit http://www.seismicnet.com/software/wq331_64bit.exe
>
> Regards,
> Larry Cochrane
> Webtronics
>
> On 5/1/2013 8:08 AM, Dave Nelson wrote:
>> Hi Barry
>>
>>     yup if you type something in the comment line then close that 
>> window
>> 1) it doesnt appear in the header info above the s'gram
>> 2) if you reopen the Event Info box  what you just typed in there has 
>> disappeared
>>
>> so at the moment I have uninstalled V3.3.0 and gone back to 3.1.8b
>>
>> The problem I have with 3.1.8b tho, is that the File Save button, 3rd 
>> in from the left, doesnt work ... instead I have to click on the File 
>> dropdown menu and select Save File in there ,,,, otherwise any work 
>> done on the file wont be saved
>>
>> Regards
>> Dave
>>
>>
>> At 09:44 PM 5/1/2013, you wrote:
>>> Dave
>>> I have v3.2.6b and got similar results. I entered a short comment 
>>> and it didn't save it. Just closing the event information window and 
>>> reopening it gave the same results.???
>>>
>>> Regards
>>> Barry
>>> www.seismicvault.com 
>>>
>>>
>>>
>>>
>>> *From:* Dave Nelson 
>>> *To:* psnlist@..............
>>> *Sent:* Wed, May 1, 2013 1:11:10 AM
>>> *Subject:* A little niggle with Winquake
>>>
>>> Hi Guys
>>>
>>>   Am addressing this to the group rather than directly to Larry ... 
>>> 2 reasons
>>>
>>> 1) to make sure its not just my installation of WQ
>>> 2) if it isnt, whether others would also find the feature useful
>>>
>>> Actually the feature used to be there  ... but it disappeared during 
>>> one
> of the
>>>     many WQ updates
>>>
>>> OK ....  I still find it really frustrating that I can no longer 
>>> save anything in the in the Event Information Comment line ...
>>> thats the first line ... where you would put the basic info of the 
>>> event ... size location, etc
>>>
>>> If I put stuff in there,  then close that window the info isnt saved 
>>> and doesnt show in the text lines above the seismogram.  WQ once 
>>> upon a time used to do this and the loss of this basic data entry 
>>> means that
> we cant name the file ...
>>> that is when you are viewing you directory of files in WQ you end up 
>>> with lots of files that have no info as to what they are  just the 
>>> usual
> eg ....
>>> Sydney, Australia (Z) instead of say .... Mw 5.9, Kermadec Islands
>>> (Z)
>>>
>>> The only way you can save the comments is if all the other data is
> entered ....
>>> date, time, lat, long, etc etc
>>> That's all very well till ya want to put comments for an event that 
>>> hasnt been located / timed professionally ... As other in my region 
>>> will agree, we get lots of unreported events ... mining blasts, 
>>> small natural quakes etc
>>>
>>> I'm running the latest version of WQ 3.3.0  32bit on Win XP Home SP3 
>>> WQ 3.2.6b  32bit didnt work either WQ 3.1.8b  32bit  did work with 
>>> saving just comments But there are other issues with that version
>>>
>>> so is it just my computer not liking the latest couple of versions 
>>> of WQ or do others see the same thing ?
>>>
>>> cheers
>>> Dave
>>> __________________________________________________________
>>>
>>> Public Seismic Network Mailing List (PSNLIST)
>>>
>>> To leave this list email PSNLIST-REQUEST@.............. 
>>>  with the body of the message 
>>> (first line
>>> only): unsubscribe
>>> See http://www.seismicnet.com/maillist.html for more information.
> __________________________________________________________
>
> Public Seismic Network Mailing List (PSNLIST)
>
> To leave this list email PSNLIST-REQUEST@.............. with the body 
> of the message (first line only): unsubscribe See 
> http://www.seismicnet.com/maillist.html for more information.
>
> __________________________________________________________
>
> Public Seismic Network Mailing List (PSNLIST)
>
> To leave this list email PSNLIST-REQUEST@.............. with the body 
> of the message (first line only): unsubscribe See 
> http://www.seismicnet.com/maillist.html for more information.
>
__________________________________________________________

Public Seismic Network Mailing List (PSNLIST)

To leave this list email PSNLIST-REQUEST@.............. with the body of the
message (first line only): unsubscribe See
http://www.seismicnet.com/maillist.html for more information.

__________________________________________________________

Public Seismic Network Mailing List (PSNLIST)

To leave this list email PSNLIST-REQUEST@.............. with 
the body of the message (first line only): unsubscribe
See http://www.seismicnet.com/maillist.html for more information.

[ Top ] [ Back ] [ Home Page ]