Hello,

This hardware is supported in the kernel, so you do not have to do
anything to add it. To find your com port, please read the following web
site.

http://www.cyberciti.biz/faq/find-out-linux-serial-ports-with-setserial/

Best regards,
Jón Frímann.

On fim, 2013-07-18 at 12:55 -0700, Bob Hancock wrote:
> Larry -
> 
> 
> Further update Linux & WinSDR.
> 
> 
> I have verified that I have six open USB ports with Linux.  When I
> list the ports I see the following:
> 
> 
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 
> 
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 
> 
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 
> 
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 
> 
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 
> 
> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 
> 
> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 
> 
> Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 
> 
> Bus 001 Device 002: ID 05e3:0716 Genesys Logic, Inc. USB 2.0 Multislot
> Card Reader/Writer 
> 
> Bus 007 Device 004: ID 1241:1603 Belkin Keyboard 
> 
> Bus 007 Device 003: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse 
> 
> Bus 006 Device 002: ID 10c4:ea61 Cygnal Integrated Products, Inc. 
> 
> Bus 008 Device 003: ID 0403:6001 Future Technology Devices
> International, Ltd FT232 USB-Serial (UART) IC 
> 
> bob@linuxmint ~ $  
> 
> 
> 
> 
> One port does not have anything in it and is not listed; however, the
> other five ports are listed.  The last item listed is the RS-232 to
> USB adaptor and as you can see Linux read it.  However, I am still not
> getting any data through to the computer and WinSDR.  Not certain what
> the problem is.  I will take a further look at the serial port and see
> if I can see anything there.
> 
> 
> Bob
> 
> On Jul 16, 2013, at 2:03 PM, Bob Hancock  wrote:
> 


__________________________________________________________

Public Seismic Network Mailing List (PSNLIST)

To leave this list email PSNLIST-REQUEST@.............. with 
the body of the message (first line only): unsubscribe
See http://www.seismicnet.com/maillist.html for more information.