Hi Ted and Gang, I was the one with the converted luggable. But I cheated and completely gutted the machine and installed a 386 DX40 mother board, 9 inch B/W VGA monitor, 500 meg hard drive, 1.44 floppy, and still had room to build in one of Larry's demod boards. I also modified the power supply to work on AC or from 12VDC so it could be operated in remote locations from a 12v car battery when no AC power is available. An AT type keyboard was modified to fit in the luggable's fold down door/bottom, as the luggable originally used an XT type keyboard that wouldn't work on the 386 mother board. The system is using the PC Labs 12 bit A/D board modified for time lock running Larry's SDR software and Winquake. There is also a 33.6 modem on board so I can upload any captured events if there is a phone line available at the remote location. On another note, I noticed that the station names on the list for me are incorrect. I don't know if that is just a typo or if they are actually listed that way. If so can they be corrected? They should be SFN and SFZ, and I would like to reserve SFE for the partly finished E/W sensor I am building. Also the TVZ listing can be removed from the list as that system has been retired. Thanks and sorry for any inconvenience that may have created. Regards, Phil SFN & SFZ _____________________________________________________________________ Public Seismic Network Mailing List (PSN-L)
Larry Cochrane <cochrane@..............>