I sent this message to Trimble, but no answer yet. Is anyone using the Placer 400 and having similar problems? Thanks, John Hello, I'm running a Placer GPS400 gps unit with the latest version of GPSSK.EXE from your web site (GPSSK V2.04). I'm using a small 10V 500ma power supply for the main power and a 9V battery for backup power. I've measured the voltage on the power connector that attaches to the Placer 400 and the voltages are OK. I used the DOS mode command: mode com1:4800,n,8,1 prior to running GPSSK, and this reduced the number of garbled lines that the PC receives. The unit does get the correct coordinates most of the time but also reports: Battery Back-Up Failed Battery Powered Timer/Clock Fault Is there an internal Lithium battery? If necessary, how can I get this unit repaired? Placer 400 P/N 22442-01 S/N 0080224858 B G104 Z T 284C GPS Computer: laptop running a DOS window under Win95 (Same results when booted up into DOS) VR Product SVEESIX Version 4.06 Release Date 05/18/94 ST Machine ID 20 -> 6 Channel TANS Error Code 1 Battery Back-Up Failed Error Code 2 Batt Powered Timer/Clock Fault Thanks, John C. Lahr U.S. Geological Survey Golden, CO (Also, lahr@......... * John C. and Jan H. Lahr * * JohnJan@........ * * 1925 Foothills Road * * Golden, Colorado 80401-1718 * * (303) 215-9913 * * http://lahr.org/john-jan * * AOL version of homepage: * * http://lahr.org/john-jan/homepage.html * * http://giseis.alaska.edu/lahr * _____________________________________________________________________ Public Seismic Network Mailing List (PSN-L)
Larry Cochrane <cochrane@..............>