Date: Mon, 24 Dec 2001 18:54:41 -0500 From: Richard Webb <dwebb002@.............> Subject: Re: WinSDR
Larry,
The cable I am using has a DB9 AND a DB25 on each end of the cable. I
looked at Tommy's connector page but could not find the db9
connector. What should be the correct pins for the Return, Transmit and GND.
Dick
At 02:27 PM 12/24/01 -0800, you wrote:
>Dick,
>
>WinSDR will run fine under NT. Karl is running it under NT and I use
>Win2K. Win2K is very similar to NT. I would double check your RS-232
>cable. The GPS receiver connects up to the sdrservr system not the WinSDR
>computer.
>
>Regards,
>Larry
>
>
>At 05:00 PM 12/24/2001 -0500, you wrote:
>>Hi and Merry Christmas to all!
>>
>>Does WinSDR run under NT? I have installed it on a laptop running
>>NT. The sdrservr is on a dos machine. I am not getting any
>>communication and have tried all available port settings. Also, should
>>the GPS be hooked to the WinSDR or the sdrservr computer? I am using a
>>Belkin file transfer serial cable that has a crossed null-modem wiring design.
>>
>>Dick
>>
>>__________________________________________________________
>>
>>Public Seismic Network Mailing List WinSDR
>>
>>To leave this list email WINSDR-REQUEST@.............. with the body of
>>the message (first line only): unsubscribe
.